|
Project started
October 2023,
We added a side filler opening and a homemade oilcap, hammered
to look like a forged part
|
Next were the front oiltank mounts, these
will be under the seat at the front of the oiltank. The third
mount will be at the back of the bottom of the tank. The tabs
on the frame were just tacked in place, like a lot of other
welds they will be easier to weld when the frame is disassembled
so we will save that for then. |
Now that the tube is bolted back in place
the modification is almost invisible, but it will make life
a lot easier not having to remove the oiltank to get the battery
out. |
Next on the list are the exhaust pipes,
when these are done we will complete the oillines and hydraulic
clutch. |
|
