Copyright WWW.DBBP.COM | updated 31-October-2022

Project started December 2020,
See the CAD version


Over the last weeks the whole oiltank has been welded, thanks Aad! I had kept the outer skin slightly oversized on the top so I would be able to trim the gap between frame and oiltank.


In one of the pics above, Aad has clamped a piece of copper to the area that is going to be welded, this is to prevent the egde from collapsing during welding.


In the meantime I have worked on the gaps and am now quite happy with the result. All I need to do is fabricate a side filler opening and pressure test.