Copyright WWW.DBBP.COM | updated 27-November-2013

 
 

A few weeks ago I mounted the wheelcovers (made by "Teach"), I like the look and it does not have any negative effect on the ride. I still needeed to replace the oilseal on the mainshaft of the transmission, so I finally got around to doing that this week.

 
 
 

I used a big woodscrew to remove the old seal. Then I replaced the cork behind the seal and mounted the new seal using the sprocket nut tool to tap it into place. Remember, the sprocket nut and the clutchhub nut both have lefthand thread! This is a five minute job, swapping the transmission back into the bike takes a bit longer....

 

 



Previous