17 April 2021
Re-rendered in Keyshot
18 August 2009
Re-rendered in Hypershot
22 April 2008
Changed background of
18 March 2008
Added chaintensioner and midcontrols
11 March 2008
Added sissybar, kickstarter and
beltcover. Changed seat style.
5 February 2008
Added pipes and changed the rear
of the frame. Also added gascaps.
29 January 2008
Changed to Avon MK 11 tires, which
have a very large diameter, so the bike
became too high.. I changed the frame and
forks to compensate for the bigger tires
and added new handlebars and colour.
18 December 2007
Added new CrimeSceneChoppers
"Rapide" headlight, changed front
forks, added oillines and made a new
oval tapered jockey shifter.
Added old-style sparkplug wires,
seat and accent stripe on tank
Added the top tree of the forks
and the handlebars. Changed the
colour back, the orange was too "bling".
Made a primary drive of the same
530 O-ring chain as the rear chain.
Can't make a primary more narrow
than that, and it looks cool too!
I added one of those great new
kickstarter covers by Baker, the
one that looks like the front of a blower!
also added rear chain and sprockets.
Ah yes, and then ofcourse I changed the
2 October 2007
I added the front leg to the springer,
made a version with only one set of
springs to get that narrow look. Ofcourse
the springs are thicker than normal.
I also added 360-brakes, very powerfull
and small enough to be almost hidden.
Finally I added more of the linkage
details to the Stromberg 97 carb.
25 September 2007
I added a Stromberg 97 carb, some
cool wheelcovers, started on the forks
4 September 2007
I started with the top of a knucklehead engine
mated to a set of alternator crankcases.
The frame is made of tapered tubes and the
tank is a severely cut up 3,5 gallon fatbob tank.
Tires are 16" firestones.