Copyright WWW.DBBP.COM | updated 27-February-2015

 
 

After completing the seatbase we focused on making some nice clean seatmounts on the frame. Aad welded a pice of steel for the magnetic base of the drill and made 3 big holes through the frame.

 
 

Some plugs were machined and welded in the frame, the front of the seat will be bolted from below with 3 M8 allen bolts, the heads of the bolts will be flush with the frame.

 
 

At the Rusty Gold swapmeet I scored a cool old brass crown gascap that would be perfect for this bike. We cut off the top and made a new bottom part from brass. Aad used silver to solder the 2 parts together.

 
 

To be continued.

Previous