Copyright WWW.DBBP.COM | updated 23-May-2005

Aad's Trees, part 2

 
 

We mounted bearing cups with internal forkstops, and put the forks in the bike. The legs we are using are Showa legs from an off-roader. They have about 12 inches of travel so they needed to be shortened 8 inches!

 
 

We also machined a new 22 mm (7/8") front axle and some spacers to center the front wheel. Aad made a polished stainless steel fork stem nut and the tool to mount it with.


 
 
 
Previous