Copyright WWW.DBBP.COM | updated 24-November-2014



CAD version here

 
 

As I write this the bike has already been completed, but I am running behind with the story, so here we go. Aad spent several hours detailing and polishing the handmade stainless grill that will be mounted inside the "dummy" tankhalf that contains battery, fuelpump, coil and the electronics of the remote control.

 
 

Finally it was time to put all the parts back on the bike, with Aad polishing everything along the way, whether or not the part would be visible. When we disassembled the wiring Aad took lots of pictures with his Iphone, however this Iphone fell in the water a while later so all the pictures were gone. It was a bit of a puzzle but we got everything working again.... To be continued.

 
 

Previous